Loading... Please wait...

Readouts

Load Cell Readout | Model GK-502

Close-up of Model GK-502 Load Cell Readout Box control panel.
  • Close-up of Model GK-502 Load Cell Readout Box control panel.
  • Model GK-502 Load Cell Readout Box.
  • Model GK-502 Load Cell Readout Box, showing load cell and communication connectors.
  • Model GK-502 Load Cell Readout Box shown with the Model 3000 Electrical Resistance Load Cell.
SKU:
Model GK-502

The Model GK-502 Load Cell Readout is designed to read the GEOKON Model 3000 4-wire and 6-wire full bridge electrical resistance strain gauge type load cells. The readout incorporates a 12 Volt, 1.4 Ahr Sealed Lead Acid battery, 16 × 2 graphic LCD with backlight, membrane keypad, and battery charger circuit. Two side-mounted Bendix® connectors are provided for load cell and communications / battery charger connection. The GK-502 displays the output in Digits, mV, mV/V, or in engineering units (lbs, Kg, Kips, etc.) by entering a gauge factor and zero reading.

Specifications

Range
±31250 digits
Resolution
±1 digit
Accuracy
±0.05% F.S. (±30 digits)
Power Requirements
12 VDC @ 22 mA (operating); 12 VDC @ 16 µA (off)
Operating Temperature
−30°C to +50°C
L × W × H
102 × 165 × 232 mm

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

Bendix® is a trademark of Honeywell International. All other trademarks are the property of their respective owners.

top