Loading... Please wait...

Inclinometers

Glue-Snap ABS Inclinometer Casing | Model 6400

  • Close-up shows the Glue-Snap sections of the Model 6400.
  • Model 6400 telescoping coupling.
  • Model 6400 casing anchor.
  • Model 6400 grout adapter.
  • Model 6400 reconnect adapter and alignment tool.
  • Model 6400 bottom plug and top cap.
SKU:
Model 6400

Model 6400 Glue-Snap ABS Inclinometer Casing is used in conjunction with an inclinometer probe or in-place inclinometer system to monitor the stability of embankments, slopes, foundation and excavation walls, piles, etc. The Model 6400 is flush-coupled allowing for quick and easy assembly.

Specifications

Casing O.D.
70 mm (6400-2)
85 mm (6400-3)
Casing I.D.
59 mm (6400-2)
73 mm (6400-3)
Length
1.5 or 3 m (6400-2, 6400-3)
Telescoping Coupling
609 mm (extended length) (6400-2S, 6400-3S)
457 mm (compressed length) (6400-2S, 6400-3S)

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top