Loading... Please wait...

Dataloggers

Model 8025 Micro-800 Datalogger | Discontinued

  • The Model 8025 Micro-800 Datalogger (this product has been discontinued).

The Micro-800 Datalogger is designed around the Campbell Scientific, Inc. Model CR800 Datalogger and uses the Model AVW200 Interface to read Vibrating Wire sensors. It’s housed in a sturdy fiberglass enclosure, has low power consumption, a wide operating temperature range, and has protection against lightning damage, making it suitable for use in harsh environments. The standard unit incorporates a Model 8032 Multiplexer, which allows for reading either 16 vibrating wire gauges and 16 thermistors, or 32 vibrating wire gauges. Communication is established via an optically isolated RS-232 interface, RS-485 Multidrops, Land line/Cellular modems, or radios. Power is provided by a 12 V, 7 Ah Gel Cell, maintained by either an AC charger or solar panel.

The Model 8021 has been replaced by the Model 8600 Series Dataloggers.

Specifications

Input Range
100 to 6500 Hz (vibrating wire)
±2500 mV (thermistor)
Resolution
0.001 Hz RMS (vibrating wire)
0.001 Ω RMS (thermistor)
Accuracy
±0.013% of reading (vibrating wire)
±0.25% of reading (thermistor)
Excitation Output
±2.5 V or ±6 V
Battery
12 V, 7 Ah Gel Cell
Temperature Range
−25°C to +50°C
L × W × H¹
502 × 461 × 263 mm

¹Does not include mounting feet.

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top