Glue-Snap ABS Inclinometer Casing and Inclinometer Casing

Photo of Model 6400.

Glue-Snap ABS Inclinometer Casing

Model 6400

Model 6400 Glue-Snap ABS Inclinometer Casing is used in conjunction with an inclinometer probe or in-place inclinometer system to monitor the stability of embankments, slopes, foundation and excavation walls, piles, etc. The Model 6400 is flush-coupled allowing for quick and easy assembly.

Specifications
Maximum O.D.¹	70 mm
Wall Thickness	5.5 mm
Length	1.5 or 3 m
Telescoping Coupling	660 mm (extended length) 508 mm (compressed length)
¹85 mm O.D. casing available on request.

Photo of Model 6500.

Inclinometer Casing

Model 6500

The Model 6500 Inclinometer Casing is used in conjunction with all commercially available inclinometer probes to monitor the stability of embankments, slopes, rock cuts, foundations and excavation walls, piles, coffer dams, etc. The casings and couplings are pop-riveted together and the joints are waterproofed using caulk and tape. The casing has wheel grooves spaced at 90° intervals, for probe orientation, and is manufactured from pultruded fiberglass ensuring a lightweight, strong, environmentally resistant casing with grooves free from spiraling.

Specifications
Maximum O.D.	70 mm (casing), 76.5 mm (coupling)
Wall Thickness	3 mm (casing), 2 mm (coupling)
Length	3 m (casing), 300 mm (coupling)
Telescoping Coupling	available up to 3 m (please specify)

Products
Strain Gages Strainmeters Jointmeters Strandmeters Crackmeters Convergence Meters Displacement Meters Displacement Transducers Extensometers Anchors Settlement Points Readout Instruments Tape Extensometers Magnetic Extensometers	Piezometers Casagrande Piezometer Tip Pressure Transducers Weir Monitors Settlement Sensors Earth Pressure Cells Concrete Stress Cells Load Cells Instrumented Rockbolts Tension Load Cells Inclinometer Probes Inclinometer Software In-Place Inclinometers Inclinometer Casing	Tiltmeters Tiltloggers Tilt Beams Pendulum Systems Readout Boxes Terminal Boxes Surge Modules Dataloggers and Software Multiplexers Frequency to Analog Converters	Borehole Pressure Cells Stressmeters Stress Cells Borehole Deformation Gages DeAerators Semiconductor Piezometers Thermistors Temperature Sensors Cables Custom Design Product Applications Discontinued Products

Please Note: Geokon maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.