Maintenance and troubleshooting of Model 6150F inclinometers is confined to periodic checks of the cable connections. The sensors are sealed and there are no user serviceable parts.
Should difficulties arise, consult the list of possible solutions shown below. Refer to Appendix C for Modbus error codes. Consult the factory for additional troubleshooting help.
Symptom: Tilt Sensor Readings are Unstable or Fail to Read
□Is there a source of electrical noise nearby? Most probable sources of electrical noise are motors, generators, and antennas.
□Check all cable connections, terminals, and plugs.
□Water may have penetrated the interior of the tilt sensor. There is no remedial action.