Appendix B.Models

Model types are distinguished by their various physical connections.

B.1Supervisor

Supervisor model types are distinguished by their physical connection to a PC.

RS-232 (8800-NA-SUP-232)

Connects to a PC running the Agent program or other Modbus RTU master via an RS-232 cable.

USB (8800-NA-SUP-USB)

Connects to a PC running the Agent program or other Modbus RTU master via a USB cable.

B.2Single Channel Node

Nodes are distinguished by their sensor connection options.

Gland Seal (8800-NA-01C-CBL)

For use with sensor cables with stripped and tinned ends. The sensor cable passes through an external cable gland and is wired into the terminal block.

10-pin ConnectoR (8800-NA-01C-10P)

For use with sensor cables with 10-pin cable connectors.

B.3Addressable Sensor Nodes

Addressable sensor nodes are used to read geokon addressable sensors. Model types are distinguished by their sensor connection options.

Gland Seal (8800-NA-ADR-CBL)

For use with sensor cables with stripped and tinned ends. The sensor cable passes through an external cable gland and is wired into the terminal block.

B.4Multi-Channel Node

Multi-channel node models are distinguished by their sensor connection options.

fOUR Channel Gland sEAL (8800-NA-04C-CBL)

For use with sensor cables that have stripped and tinned ends. The sensor cables pass through external cable glands and are wired into the terminal block.

eIGHT Channel Gland SeaL (8800-NA-08C-CBL)

For use with sensor cables that have stripped and tinned ends. The sensor cables pass through external cable glands and are wired into the terminal block.

B.5Compatibility

All 8800-NA-XXX-XXX models are backwards compatible with the following legacy GeoNet products: