Loading... Please wait...

Extensometers

Multiple Point, Retrievable | Model 1300 (A-9)

  • Model A-9 Retrievable Extensometer.
  • The Model 1300-3 Pressure Manifold, which contains on/off valves and check-valves, connects to each of the inflation lines leading to the anchors, enables each of the anchors to be actuated in turn, and maintains the anchor pressure during the monitoring period.
  • Illustration shows a typical Model A-9 installation in a concrete pile.
SKU:
Model 1300 (A-9)

The Model A-9 Retrievable Extensometer (Patent No. 5,585,555) is designed to measure deformations in boreholes in rock, concrete, and other construction materials. The device can be used in pile load test studies, plate jacking tests and virtually any application where a hole can be drilled or a pipe can be cast into the structure being studied. The system features adjustable gage lengths, rapid and simple installation/removal and high accuracy using a variety of transducers including Vibrating Wire and DCDT’s. Adapters for use in square tubing are also available.

Specifications

Standard Ranges¹
12.5, 25 mm
Resolution
0.02% F.S.
Accuracy²
±0.1% F.S.
Temperature Range¹
−20°C to +80°C
Diameter
45 mm (anchor); 25 mm (transducer)
Overall Length
495 mm

¹Other ranges available on request.

²Established under laboratory conditions.

Please Note: Geokon maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top