Loading... Please wait...

Extensometers

Multiple Point, Rod | Model 1100

Flange type Model 1100 Extensometer with Borros and Rebar borehole anchors.
  • Flange type Model 1100 Extensometer with Borros and Rebar borehole anchors.
  • Flangeless type with bladder anchors.
  • Model 100-S-BORROS, 1100-GROUTABLE and 1100-BLADDER anchors (left to right)
SKU:
Model 1100

The Model 1100 Rod Type Borehole Extensometer utilizes measurement rods to connect sensors inside the head of the extensometer to anchors installed in a borehole. Movement of the anchors in relationship to the head of the extensometer, which is anchored at the mouth of the borehole, can be analyzed to reveal the magnitude of the deformation between the anchors. Readout is achieved by connecting the head of the extensometer to a portable readout, datalogger, or similar device.

Specifications

Standard Ranges¹
12.5, 25, 50, 100, 150, 200, 300 mm
Least Reading
0.025 mm
Minimum Borehole Diameter²
73 mm
Maximum Length
100 m

¹The minimum borehole diameter increases with the addition of more measuring points.
Please refer to the Model 1100 data sheet for more information.

²Other ranges available on request.

Compatible Readouts and Dataloggers

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top