Loading... Please wait...


Pressure Transducers (VW) | Model 4500H · 4500HH

  • Model 4500H Pressure Transducer.
  • Model 4500HH Pressure Transducer.
Model 4500H · 4500HH

The Model 4500H and 4500HH Pressure Transducers* are supplied with 1⁄4-18 female NPT (4500H) and
7⁄16-20 60 degree female medium pressure (4500HH) fittings to permit the transducer to be coupled directly into hydraulic or pneumatic pressure lines. Other pipe thread sizes are also available.


Standard Ranges
4500H | −100 to 70, 170, 350, 700 kPa; 1, 2, 3 MPa
4500HH | −100 to 5, 7.5, 10, 20, 35, 75, 100 MPa
Over Range¹
1.5 × rated pressure
0.025% F.S. (minimum)
±0.1% F.S.
<0.5% F.S. (±0.1% F.S. optional)
Temperature Range²
−20°C to +80°C
Length × Diameter
4500H | 140 × 25.4 mm; 140 × 32 mm (70, 170 kPa)
4500HH | 143 × 25.4 mm

¹All high pressure sensors are potentially dangerous and care must be taken not to over-range them beyond their calibrated range. Sensors are tested to 150% of the range to provide a factor of safety.

²High temperature versions available on request.

*Please Note: All Geokon vibrating wire piezometers include tripolar plasma surge arrestors to protect the sensor coils from possible lightning damage. Semiconductor piezometers are also available (see 3400 Series).

Please Note: Geokon maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.