Loading... Please wait...

Settlement Sensors

Settlement Plate | Model 4625

  • Model 4625 Settlement Plate System, fully assembled.
  • Model 4625 Settlement Plate closeup.
  • Model 4625 Coupling closeup.
  • Model 4625 used to monitor settlement on an existing ground surface, after the placement of an embankment.
SKU:
Model 4625

The Model 4625 Settlement Plate System is designed primarily as an inexpensive means for monitoring in areas where significant settlement or substantial material displacement is expected. The system consists of a base plate and a reference rod (riser pipe) equipped with necessary threaded end connections enabling the pipe sections to connect to each other, as well as attach to the plate. Settlement plates are most commonly installed on an existing ground surface prior to the placement of an embankment, however they may also be successfully utilized in deep excavations. Settlement plates may be used alone or in conjunction with other instrumentation including piezometers, remotely-monitored settlement systems and horizontal inclinometers.

Specifications

Riser Pipe
1½" × 5 feet long SCH40 Galvanized Steel pipe, male threaded both ends
Coupling
1½" SCH40 Galvanized steel, female threaded both ends
Pipe Cap
1½" SCH40 Galvanized steel, female threaded

Please Note: Geokon maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top