Loading... Please wait...

Tiltmeters · Pendulums

Tiltmeter (VW) | Model 6350

  • Model 6350 Vibrating Wire Tiltmeter.
Model 6350

The Model 6350 Vibrating Wire Tiltmeter is designed to measure tilt in structures such as buildings, dams and embankments, and also for measurements related to the stability of slopes, open pits, and the walls of excavations (e.g. slurry walls). The tiltmeter is permanently attached to the structure to be monitored and can make measurements on horizontal or vertical surfaces. Readings are taken with the Model GK-405 Vibrating Wire Readout or continuously and remotely with the Micro-1000 or Model 8002 Series dataloggers.


Standard Range¹
±0.05 mm/m (8 arc seconds)
±0.1% F.S.
Temperature Range¹
−20°C to +80°C
Length × Diameter
194 × 32 mm (transducer only)

¹Other ranges available on request.

²Established under laboratory conditions.

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.