Loading... Please wait...

Settlement Sensors

Multilevel Settlement System (VW) | Model 4675

  • Model 4675 High Sensitivity Settlement System.
  • Installation of the Model 4675 on a concrete wall with exaggerated settlement to illustrate change in elevation.
SKU:
Model 4675

The Model 4675 Multilevel Vibrating Wire Settlement System consists of a series of vessels containing liquid level sensors interconnected by a liquid filled tube. A reference vessel is positioned at a stable bench mark location with additional vessels positioned at different locations, at approximately the same elevation. Differential settlement, or heave, between any vessel and the reference vessel results in an apparent rise or fall of the liquid level in that vessel. This system is particularly suitable for critical situations where high resolutions are required. Elevation changes of as little as ±0.02 mm are detectable.

Specifications

Standard Ranges¹
100, 150, 300, 600 mm
Resolution
0.025% F.S.
Sensor Accuracy²
±0.1% F.S.
Temperature Range
−20°C to +80°C (using antifreeze solutions)
Dimensions
depends on range

¹Other ranges available on request.

²Laboratory accuracy. Total system accuracy is subject to site-specific variables.

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top