Loading... Please wait...

Readouts

MEMS Readout | Model RB-500

  • Close-up of Model RB-500 MEMS Readout Box control panel.
  • Model RB-500 MEMS (Micro Electro Mechanical Sensor) Readout Box.
SKU:
Model RB-500

The Model RB-500 MEMS (Micro Electro Mechanical Sensor) Readout is designed to read the voltage output from the Model 6100 Series MEMS sensors. The RB-500 incorporates a 12 volt, 1.2 Ahr lead acid battery, a 4½ digit liquid crystal display (LCD), a power on/off switch, an A/B selector switch, a battery charger circuit, an AC adaptor connector, and an Input Junction Box Assembly. The RB-500 supplies +12 V power to the MEMS sensor and displays the output in volts, which is proportional to the angle of inclination.

Specifications

Range
±4.000 volts
Display Range
±1.999 volts
Resolution
1 mV
Accuracy
±0.06% F.S.
Power Requirements
12 VDC @ 50 mA
Operating Temperature
−30°C to +50°C
L × W × H
102 × 165 × 232 mm

Please Note: Geokon maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.

top