Loading... Please wait...


In-Place Inclinometer (VW) | Model 6300

  • Model 6300 Vibrating Wire In-Place Inclinometer installation detail, with section of the Model 6500 Inclinometer Casing removed.
  • Model 6300 Vibrating Wire In-Place Inclinometer.
Model 6300

The Model 6300 Vibrating Wire In-Place Inclinometer is used in conjunction with near vertical inclinometer casing for the measurement of lateral displacement, similar to the Model 6000 Inclinometer Probe. However, the Model 6300 In-Place system is designed to be left, in place, inside the casing to permit automatic or continuous monitoring. Strings of sensors are joined together to obtain deflection profiles.


Standard Range¹
±0.05 mm/m (±10 arc seconds)
±0.1% F.S.
Temperature Range¹
−20°C to +80°C
Length × Diameter
187 × 32 mm (sensor)

¹ Other ranges available on request.

² Established under laboratory conditions.

³ Depends on readout equipment.

Please Note: GEOKON maintains an ongoing policy of design review and reserves the right to amend products and specifications without notice. Various instruments are discontinued over time and replaced with new, updated models.