Loading... Please wait...Nine Data Sheets Now Available
-
Electrical Resistance Type Load Cells (New)
The Model 3000 Series Load Cells is made from an annulus of high-strength steel or aluminum, with electrical resistance strain gages in a Wheatstone Bridge configuration.
-
Electrical Resistance Type Rebar Strainmeters (New)
Model 3911 Electrical Resistance Type Rebar Strainmeters are designed primarily for monitoring the stresses in reinforcing steel in concrete structures, such as bridges, concrete piles and diaphragm walls.
-
Magnetic Extensometers (Updated)
The Model 1900 Magnetic Extensometer is designed to measure settlement or heave of soft ground under the influence of loading or unloading due to the construction of embankments, fills, buildings, foundations, and structures.
-
Multipoint Settlement Systems (Updated)
The Model 3655 and 4655 Multipoint Settlement Systems are comprised of a series of sensitive Semiconductor Pressure Transducers (3655) or Vibrating Wire Pressure Transducers (4655) connected together with a special Nylon tube.
-
Deformation Meters (Updated)
The Model 4430 Deformation Meter with flanged ends is designed to measure longitudinal deformation in dams and embankments. It can also be grouted or held in place by hydraulic anchors to measure deformations in boreholes (over the gage length).
-
Vibrating Wire Load Cells (Updated)
The Model 4900 Series Vibrating Wire Load Cell consists of a cylinder of high-strength steel with 3, 4 or 6 vibrating wire strain gages located around the circumference of the cell.
-
MEMS Tiltmeter (Updated)
The Model 6160 MEMS Tiltmeter is designed for attachment to structures, on either a vertical or horizontal surface by means of an adjustable bracket, and for the subsequent measurement of any tilting that may occur.
-
Pendulum System (Updated)
The Model BGK-6850A Pendulum System is designed to make accurate measurements of the relative movements of normal and inverted pendulums, such as those found in dams, and can be installed as a new system or as an electronic upgrade for an existing system.
-
Autoresonant Vibrating Wire Sensors (Updated)
The Model 4500CPR · 8020 Series · AR Series expand the possibilities of dynamic monitoring while retaining the inherent long-term stability of Geokon's line of vibrating wire instruments.
